SSRD and Project Report Draft

Quick status update this week. I gave a talk on my senior project during Student Scholarship Recognition Day (SSRD) at Willamette, which you can view here. Unfortunately, although my robot was working (avoiding obstacles) the night before, when I went to take a video of it for the presentation (just in case it didn't work when I wanted to demo), it stopped working, so the video in the presentation is just my old one which demos the various movements possible on the robot. I haven't had time to figure out what is wrong yet, but the problem seems to be that it isn't always detecting the floor.

I also finished a pretty rough draft of my project report which can be found here. There is a lot of stuff that still needs to be filled in (images, diagrams, future work, lessons learned, etc) but its a start.

By next week I hope to have fixed the issues with the obstacle avoiding robot, and start work on the simulation to finish up my project.

Hardware vs Simulation

Last week I mentioned that I would be probably end up changing some elements of my project, based on the time I have left and what still needed to be accomplished. Recently I have decided that I will not be able to accomplish what I set out to do in the project if I continue on the same pace, working with hardware. I have been spending a lot of time hooking parts together, debugging them, figuring out I need different parts, ordering those and waiting for them to be shipped, making little progress for the large amount of time spent.

In order to get the robots to accomplish the simple task (finding a glyph and then gathering around it) I would need to order a webcam (which the Pi would hopefully be able to power), set up the robots to recognize the glyph using image processing (which the Pi would hopefully be able to do quickly enough) and then somehow get the robots to communicate to each other (or at least notify the others when the glyph is found, and then have them locate and group around the successful robot). Given more time, I think I'd be able to accomplish this, but since there is only 19 days left until we present out senior projects (with the paper due before then), I don't think its reasonable to assume this would be possible. However, I don't just want to finish the semester with no cooperative activity either (the project is entitled Swarm Robotics, after all  - not very impressive without something you could call a swarm).

My plan to accomplish the original goal of creating a swarm is to switch over and finish the project in a simple simulation. I want to simulate a 2D world, and create robots that mimic the one I designed: able to spin freely, sensors to detect obstacles, etc. In this world I will place a goal for the robots to find, and have them run code similar to what I have now. This way, I will be able to demonstrate the swarm behavior of the robots, but without having to spend too much time dealing with the issues that arise with the hardware. I think that I have enough time left to create an finish this simple simulation, and that it is a suitable compromise between what I set out to do and the time I have left to do it.

SSRD Draft

The parts I ordered last week arrived, and I've now hooked up the sensors, so I can have a working obstacle-avoiding robot to demo during my Student Scholarship Recognition Day (SSRD) presentation next week.

One problem I ran in to this week is that because of the way I had my demo program startup on the boot of the Raspberry Pi, I was unable to bypass it (in order to actually change anything in Linux) so I ended up setting up the other SD card, getting the network drivers working, downloading RPi.GPIO, and using that to test the sensors.

The rest of the time this week was spent creating a draft of the SSRD presentation and a really rough draft of the project report. I'll post versions of these next week, once they are more polished.

One last thing is just a note that I will be probably end up changing some elements of my project, based on the time I have left and what still needs to be accomplished... more on that soon.

More parts

This week I attempted to get the distance sensors hooked up to the robot, but noticed that I ordered sensors without the carrier boards, which are necessary to run them... whoops. So, I ordered the carrier boards for the sensors, breadboards that will fit everything that I need on the robots, and a a couple more chassis plates that I can stack on top of the existing plate (with some sort of standoff/screw) in order to create more space for all the components.